Building & Landscaping Materials

Building & Landscaping Materials are the core materials used within the building, construction, landscaping and groundwork industry. Primary material is quarried and processed in quarries and although they can be more expensive than Recycled Aggregates, nearly all primary materials will carry a BS number unlike many recycled products.

What we supply

We can supply: Building SandBallastSharp Sand10mm Pea Shingle20mm Gravel40mm and Rejects to name but a few of the primary materials.

For decorative gravel please go the the Local Decorative Gravel page or Other Decorative Gravel for more specialist materials.

Sidebar Sidebar Sidebar
  • RC35/45 Ready Mixed Concrete Willis & Ainsworth Ltd

    RC35/45 Ready Mixed Concrete

    RC 35/45 is a very strong, reinforced concrete mix that is best suited to highly demanding, exposed conditions such as farm buildings and outhouses. Due to its excellent strength and durability, RC 35/45 concrete can also be used for industrial...
  • C25/30 Ready Mixed Concrete Willis & Ainsworth Ltd

    C25/30 Ready Mixed Concrete

    PAV 1 concrete mix (also known as C30), is typically used in pavement construction and lighter outdoor applications. PAV1 mixes offer increased protection from frost - particularly freeze-thaw action, thanks to a very efficient...
  • GEN 2 Ready Mixed Concrete Willis & Ainsworth Ltd

    GEN 2 Ready Mixed Concrete

    GEN2 concrete is the ideal material for domestic flooring if there is no embedded metal in the floor, or if there is no permanent floor finish to be installed afterwards. GEN2 can however be carpeted or tiled. Generally, GEN2 concrete...
  • GEN 1 Ready Mixed Concrete Willis & Ainsworth Ltd

    GEN 1 Ready Mixed Concrete

    GEN1 concrete (also known as C10), is a versatile, lightweight mix used by the construction industry for domestic and general non-structural applications. GEN1 Applications GEN1 / C10 concrete can be used for a range of applications as its...
  • GEN 0 (ST1) Ready Mixed Concrete Willis & Ainsworth Ltd

    GEN 0 (ST1) Ready Mixed Concrete

    GEN0 Concrete (also known as ST1) is a slightly weaker, lightweight concrete that is ideally suited for applications that require little to no structural strength but needs a firm base. ST1 is made up of a combination of water,...
  • Sharp & Washed Mixed Sand (Plastering Sand) Willis & Ainsworth Ltd

    Sharp & Washed Mixed Sand (Plastering Sand)

      Mixed Sand is a blend of washed plastering sand and sharp sand, it is blended together to make the materials easier to work with on certain jobs and to help get a better finish. It is used for screeding or plastering jobs. We deliver small and...
  • Washed Plastering Sand Willis & Ainsworth Ltd

    Washed Plastering Sand

      Washed Plastering Sand is washed sand specifically produced for plastering and rendering. It is more expensive than local building sands as it is processed to remove unwanted silt content and is also imported into the area. It can also be...
  • Building Sand Chieveley Blonde Building Sand

    Building Sand

      Building sand is often known as 'soft sand' and is a screened, clean sand that is used to lay bricks. Plasterers also use our local building sand for plastering and rendering as it is extremely versatile. We can supply: Upwood Building Sand, Frith...
  • Reject Gravel Willis & Ainsworth Ltd

    Reject Gravel

      40mm plus uncapped rejects flint is unwashed and a true reject material. It is all oversized gravel i.e. all gravel over 40mm. Some of our local rejects can be used in infill, backfill, drainage and soakaways. This is because it is naturally...
  • 40mm Gravel Willis & Ainsworth Ltd

    40mm Gravel

      40mm Gravel is usually a 20-40mm graded material. Our "local" 40mm is flint based but it comes in many different colours. 40mm Gravel can be used for: drainage, pipe bedding, oversites and borders. 40mm Gravel can be a mixture of materials, this...
  • MOT Type 1 Type 1 MOT / DOT or Willis and Aisnworth

    Type 1 MOT

    Type 1 MOT is a sub-base. It is a crushed limestone or granite aggregate. It is graded a 0 - 32mm or 0 - 40mm size. It is usually a grey or pink colour although where it's a natural stone we can't choose which colour we supply. Mot Type 1...
    £73.04
  • Scalpings

    40mm Scalpings

    Scalpings is a 40mm down to dust limestone or granite material. It can often be confused with MOT Type 1. 40mm Scalps, it doesn't have to conform to any testing and therefore scalpings tend to be stonier or "dustier" than Type 1. It is generally used...